Tire Inflator

Tire Inflator SKE-012-OD

Picture for reference only

Main features:

*174PSI/12bar/1200kPa Output pressure 

*Fit for almost any size automotive service facility

*Auto-Start Inflation

*Fully Automated, fully programmable, micro-processor controlled conversion system

*Self-diagnostic features

*Suit for: Car, Light Truck, Bus

Technical Parameters:

Dimensions   (Height*Width*Depth)

1260mm*360mm*360mm

Net   Weight

17.5kg/38.6lbs

Gross   Weight

21kg/44.6lbs

Packing   Size (Height*width*Depth)

200mm*1290mm*360mm

Power   Requirement

100-240Vac   50/60HZ

Power   Consumption

23VA

Operating   Temperature Range

-20℃/-4℉   to 70℃ /158℉

Max   Inlet Air/ Nitrogen Supply

217PSI/   15bar /1500kPa

Operating   Range

5-174PSI/0.3-12bar/35-1200kPa

Accuracy

±1PSI/0.07bar   / 7kPa

Resolution

1PSI/   0.1bar /5kPa

Units   of Measurement

PSI/   bar / kPa

Specifications:

1.Auto-Start inflation

2.Automatic zero drift adjustment

3.Remain at last setting

4.Comprehensive diagnostics and error reporting

5.Audible and visual end of the cycle signal indicators

6.Large backlight LCD display

7.Vandal resistant mechanical switches

8.Suits Standard nitrogen bottle/ Direct nitrogen supply from generator/Air compressor

9.1 Nos.*10M/32.8ft standard hose with single clip-on open type chuck

 

Operation Steps:

1. Set final target pressure using the +and -buttons.The LCD screen will show the target pressure.

2. Connect air hose to tire valve stem

3. Push the "FILL" button once

4. When unit "beeps" and the LCD screen flashes the target pressure, tire inflation is complete

5. Immediately remove hose